Raymarine forum / Raymarine Forums / Networking / System Integration v / Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
05-05-17, 10:54 AM
Post: #20
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
Welcome to the Raymarine Forum LulaNord,

Q1. I think Maretron's field installable DeviceNet M/F plug can be installed on the SeaTalkng backbone cables to permit one end of each cable to be mated to Maretron backbone. Right?

A1. Please click here to view a FAQ addressing this subject.


Q2. Is it true that one needs to cut one end of the SeaTalkng Backbone Cable and field install a Maretron connector?

A2. Yes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter - Chuck - Raymarine - Moderator - 05-05-17 10:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication