Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
12-21-16, 10:55 AM (This post was last modified: 12-21-16 11:28 AM by Chuck - Raymarine - Moderator.)
Post: #14
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
I have a similar connection question. Sister's boat has an ST4000+ and a new a75 MFD. I have the E22158, so I take it I need the A22164 to connect to one of the ST1 ports on the ST4000+? It would be so much simpler if the a75 had a NMEA0183 connection, like my e7d does. The E22158 has the NMEA cable, but reading the documentation, it doesn't sound like the converter will pass the track, etc., data strings through to the pilot, only location data?
Thank you!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter - brewgyver - 12-21-16 10:55 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)