The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] A06070 Right Angle Power Connector

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] A06070 Right Angle Power Connector
03-22-20, 04:41 PM (This post was last modified: 03-24-20 10:13 AM by Chuck - Raymarine - Moderator.)
Post: #1
peterjdsr Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2020
Reputation: 0
[CA11] A06070 Right Angle Power Connector
I have a very tight space behind the cockpit's cabin bulkhead for a simple non-networked installation of the i50 series Speed or Tridata indicators on my sailboat. I just need to connect only a power cable which appears to be bulky. Transducer/sensor connections are spade lugs and don't require much if any space off the back of the indicator.

What are the connected dimensions and clearance needed for this A06070 right angle power cable, when connected to an i50 device? The i50 manual in sec. 3.6 only provides product and cable dimensions for this device seemingly when connected to a straight spur or power cable.

Alternatively could I use an A06077 right angle STng connector with the straight A06049 power cable to accomplish the same power connection? any help greatly appreciated!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] A06070 Right Angle Power Connector - peterjdsr - 03-22-20 04:41 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication