Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RAY60 with v1.28
06-09-16, 10:01 AM
Post: #2
RE: RAY60 with v1.28
Welcome to the Raymarine Forum psubill78,

The RayMic software and that of the Ray60/70 VHF Radio must both be updated with v1.04 and v1.24 software respectively to communicate with one another. The RayMic and Ray60/70 are designed to be switched ON/OFF independently of one another via their respective POWER buttons. The RayMic's screen simply repeats that of the Ray60/70's screen. The RayMic must be switched ON in order for the Ray60/70 to report the RayMic's software version. Both the Ray60/70 VHF Radio and RayMic software version may be displayed via the command sequence MENU->SET-UP->MAINTENANCE->ABOUT THIS UNIT; Scroll the screen using the menu selection knob to view the SW Version and Handset values. It is not expected that the RayMic's software version may be viewed via a MFD.

Should the initial update of the RayMic have failed, then it is recommended that it be checked again.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RAY60 with v1.28 - psubill78 - 06-08-16, 04:28 PM
RE: RAY60 with v1.28 - Chuck - Raymarine - Moderator - 06-09-16 10:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)