Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120/E80 crash with Platinum+ cartridge
07-22-16, 01:50 PM
Post: #2
RE: E120/E80 crash with Platinum+ cartridge
Welcome to the Raymarine Forum Fricchione,

The E-Series Classic MFDs were designed for use with Navionics Platinum, not Navionics Platinum Plus cartography. The significantly larger quantity of data stored on the Platinum Plus chart cards may dramatically slow screen redraw and may in some cases, overwhelm the processing capabilities of the E-Series Classic MFDs, causing instability of these MFDs as you have reported. Additionally, the quantity of cartography stored on a Platinum Plus chart card cannot be manipulated as it can be on a Navionics+ chart card ... now the most commonly recommended chart cards for use with the A/C/E-Series Classic MFDs. As the hardware and software of these MFDs can no longer be changed/updated and Navionics continues to producer cartography products marketed as being compatible with these MFDs, it is recommended that such issues be reported to Navionics in order that Navionics may be investigate and ultimately provide a chart card(s) which will be compatible with your MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: E120/E80 crash with Platinum+ cartridge - Chuck - Raymarine - Moderator - 07-22-16 01:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)