e165 v17.45 units selection
|
08-01-16, 01:02 PM
Post: #1
|
|||
|
|||
e165 v17.45 units selection
Working with an e165, updated to v17.45, now cannot change speed & distance units. Will default to Speed = knots, Distance = statute miles.
Problem did not exist with v16.47. I can disconnect STng and e165 will allow selection of units. Devices on STng: RS130, and ST converter E22158, v2.01, ST1 devices: ST60+ Tridata, ST6002 control, and S2G pilot. Tridata is displaying knots & nm. What is on the STng network causing the e165 to default to knots/mph? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
e165 v17.45 units selection - markct - 08-01-16 01:02 PM
RE: e165 v17.45 units selection - Mark - Raymarine - Moderator - 08-01-16, 02:48 PM
RE: e165 v17.45 units selection - markct - 08-01-16, 03:30 PM
RE: e165 v17.45 units selection - Mark - Raymarine - Moderator - 08-02-16, 02:26 PM
RE: e165 v17.45 units selection - markct - 08-02-16, 03:02 PM
RE: e165 v17.45 units selection - markct - 08-09-16, 12:33 PM
RE: e165 v17.45 units selection - Chuck - Raymarine - Moderator - 08-09-16, 01:55 PM
RE: e165 v17.45 units selection - markct - 08-10-16, 12:17 PM
RE: e165 v17.45 units selection - Chuck - Raymarine - Moderator - 08-10-16, 03:01 PM
RE: e165 v17.45 units selection - markct - 08-11-16, 08:36 AM
RE: e165 v17.45 units selection - Chuck - Raymarine - Moderator - 08-11-16, 09:15 AM
|
User(s) browsing this thread: 1 Guest(s)