Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
s1000 auto pilot conection to a128 MFD or upgrade
08-31-16, 12:49 PM (This post was last modified: 08-31-16 12:50 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: s1000 auto pilot conection to a128 MFD or upgrade
Welcome to the Raymarine Forum Doncloes,

When interfaced to a Ray70 via the MFD's NMEA 183 Port 1, the MFD's NMEA Port 1 must be configured to AIS 38400 (i.e. 38400 BAUD NMEA 0183 communications). The S1000 only supports 4800 BAUD NMEA 0183 communications. In this case, it would be recommended that the MFD and Ray70 each be interfaced as spurs to a powered and properly terminated SeaTalkng backbone, leaving the MFD's NMEA 0183 port 1 available to be interfaced to the S1000. When so interfaced the MFD's NMEA 0183 Port 1 will need to be configured to "NMEA 4800".
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: s1000 auto pilot conection to a128 MFD or upgrade - Chuck - Raymarine - Moderator - 08-31-16 12:49 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)