The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
a/c/e/eS/gS-Series MFD System Configuration Settings
09-26-16, 11:13 AM (This post was last modified: 01-10-17 04:37 PM by Chuck - Raymarine - Moderator.)
Post: #1
a/c/e/eS/gS-Series MFD System Configuration Settings
a/c/e/eS/gS-Series MFD System Configuration Settings

It is considered a best practice to back up your system's configuration settings and data on a regular basis to prevent accidental loss. It is also considered a best practice to our system's configuration settings and data prior to updating the software of the a/c/e/eS/gS-Series MFDs. Information concerning your system settings may also be beneficial in supporting investigation of a problem. Executing the command sequence (HOME->MY DATA->IMPORT/EXPORT->BACK-UP SETTINGS from the system's Data Master MFD (HOME->SET-UP->DATA MASTER) or MFD on which the problem was observed will permit the following file containing your MFD's settings to be created and saved to your microSD memory card:
----- RayMFDSettings.tgz


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
a/c/e/eS/gS-Series MFD System Configuration Settings - Chuck - Raymarine - Moderator - 09-26-16 11:13 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)