Raymarine forum / Raymarine Forums / Product Selection Assistance v / Upgrades to Existing Raymarine System on B35.5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrades to Existing Raymarine System on B35.5
06-13-17, 10:57 AM
Post: #20
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Upgrades to Existing Raymarine System on B35.5
Tnauck,

It certainly appears that you have identified the source of the failure. The SeaTalkng 5-Way Connector will need to be replaced, as Raymarine does not service networking components. Should you be able to remove the SeaTalkng 5-Way Connector's pins from the SeaTalkng Backbone Cable's plug without damaging the cable's plug, then it may continue to be used.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Upgrades to Existing Raymarine System on B35.5 - Chuck - Raymarine - Moderator - 06-13-17 10:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication