E7D MFD Depth not reading correctly

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Stan,

It is recommended that you verify that the MFD's Fishfinder application's transducer selection settings (MENU->SET-UP->TRANSDUCER SET-UP->TRANSDUCER) has been configured to correctly specify that model of transducer which has been interfaced to the MFD's transducer socket. If so, then the reported problem may be rooted in the transducer, the MFD's fishfinder circuitry, or in the conditions under which the system had been tested. Please click here to view a FAQ addressing this subject.