Raymarine forum / Raymarine Forums / Multifunction Displays v / Upgrading older system...

Post Reply 
 
Thread Rating:
  • 2 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrading older system...
02-28-17, 10:46 AM
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Upgrading older system...
Fishbut,

Q1. Wanted to ask if the new 300 would plug directly to the master E120w using the NG cable?
A1. I assume that you actually meant Raystar 130 GPS Sensor, not "new 300". If so, then the answer would be no. Please click here to view a FAQ addressing this subject. Again, the Raystar 130 GPS Sensor has been replace by the Raystar 150 GPS Sensor.

Q2. Or would it require the NG "backbone"?
A2. Yes. See the link included within my prior response which would direct you to a FAQ addressing how a Raystar 130/150 GPS Sensor would be interface to a C/E-Series Widescreen MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrading older system... - FishBut - 01-20-17, 12:39 PM
RE: Upgrading older system... - FishBut - 01-20-17, 02:31 PM
RE: Upgrading older system... - FishBut - 02-08-17, 09:25 AM
RE: Upgrading older system... - FishBut - 02-08-17, 11:53 AM
RE: Upgrading older system... - FishBut - 02-26-17, 08:03 PM
RE: Upgrading older system... - FishBut - 02-28-17, 06:57 AM
RE: Upgrading older system... - Chuck - Raymarine - Moderator - 02-28-17 10:46 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication