The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Updating the software within Raymarine products featuring a SeaTalkng interface
02-29-16, 09:13 AM (This post was last modified: 01-12-17 10:27 AM by Chuck - Raymarine - Moderator.)
Post: #1
Updating the software within Raymarine products featuring a SeaTalkng interface
Updating the software within Raymarine products featuring a SeaTalkng interface

Downloads and instructions for the latest available Raymarine product software updates here. Many of Raymarine's instrument, autopilot, GPS sensors, VHF radios, etc. featuring a SeaTalkng communications interface are designed to receive software update via that communications interface. This requires that the device to be updated a compatible MFD each be interfaced via a powered and properly terminated SeaTalkng/NMEA 2000 backbone. The software update page for each of these products identifies the MFDs that may be used to update the device's software. Should one desire to update the software of a device featuring a SeaTalkng interface and one own a MFD which is not designed to be interfaced via SeaTalkng to the device, then it would be necessary to have the VHF radio updated by one of the following:
- a certified Raymarine installer
- a Raymarine dealer (recommend calling the dealer to verify that they provide software update services)
- Raymarine's Product Repair Center

RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Updating the software within Raymarine products featuring a SeaTalkng interface - Chuck - Raymarine - Moderator - 02-29-16 09:13 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)