The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / E120 / AIS Problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 / AIS Problem
02-12-17, 07:56 PM (This post was last modified: 02-13-17 03:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
TomHalfmoon Offline
Junior Member
**
 		Posts: 7
Joined: Feb 2016
Reputation: 0
E120 / AIS Problem
Hi All

We recently purchased a new to us Trawler. It has Raymarine E120 & E80 MFD's, radar and auto pilot.

I noticed that the software on the MFD's was about 4 Revs levels out of date. So after much effort I was able to get both MFD's to the latest/last revision.

The new problem now is the AIS is not showing any target data. A RED X on the AIS icon on the display. Prior to the upgrade the AIS worked fine. No re-connections or wiring changes were made. The AIS is a SR 161 receiver connected via a Brookhouse MUX.

I have verified that the MFD is set for AIS 38400. I can find no other setting within the various menu pages???

I have also verified that the AIS is streaming data via computer and Open CPN.

Any suggestions?

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E120 / AIS Problem - TomHalfmoon - 02-12-17 07:56 PM
RE: E120 / AIS Problem - TomHalfmoon - 02-14-17, 02:16 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication