The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sonarchart Live - Sensor depth not working
02-19-17, 08:38 AM
Post: #1
Question Sonarchart Live - Sensor depth not working
Setup:
I have an e127 MFD with Sonarcharts enabled and running that's connected to an older Seatalk depth sounder, via a Raymarine Seatalk-NMEA2000 converter.
My ST60 Tridata is set to show depth under the keel (sailboat).

The problem:
The system doesn't seem to be able to offset the depth of the sensor.
The live readings in the MFD shows the depth under the keel (that's offset by 6.4ft in the ST60 Tridata). Here in Bahamas that means my charts are now clogged up with red blurs.

I have figured out how to turn off the live reading in the charts but I'd love to be able to have the Sonarchart live show correct depth.

Question:
Is there a something I can do to counter the ST60 depth offset?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Sonarchart Live - Sensor depth not working - Inspirare - 02-19-17 08:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)