The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Master Display Question
02-19-17, 07:30 PM
Post: #1
Master Display Question
Hopefully, this will be my last request for info.
With an A128 at the bow, matched with the CPT-100 transducer on the trolling motor, I have a water temp reading, from the temp sensor mounted in the transducer.
With the A127 mounted at the console, I run an in hull transducer for 2D sonar and the CP-200 for Side Vision. The Side Vision transducer does not provide water temp. The units are linked with a network cable, but are not connected with a sea talk cable.
With the bow unit on only, I have a water temp reading in my data box. If I turn both units on, regardless of which unit is selected as the Master Display, the water temp remains at 32 deg.
Any ideas on a resolution to this, would be appreciated.

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Master Display Question - Natch - 02-19-17 07:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)