Cam210IP Installation
|
03-01-17, 04:38 PM
Post: #2
|
|||
|
|||
RE: Cam210IP Installation
Welcome to the Raymarine Forum Barry,
Q1. Can I run shielded RJ45 male to Male cable from the HS Network Switch to the Camera? A1. Yes Q2. Should I run 16 gauge Red/Black Power Cable? A2. The gauge of cable installed is dependent upon the round trip distance involved. Please click here to view a web page addressing this subject. Q3. Will the pigtail on the camera connect both the RJ45 and the Power Cable? A3. Yes. Alternatively, a POE Injector may be installed between the camera and the Network Switch, to instead power the camera via the POE. Q4. Should I have a separate power switch for the camera? A4. All products should be powered via a switched power circuit. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Cam210IP Installation - Trawlerboat - 02-27-17, 01:38 PM
RE: Cam210IP Installation - Chuck - Raymarine - Moderator - 03-01-17 04:38 PM
|
User(s) browsing this thread: 1 Guest(s)