The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / ray240 showing "no gps"

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ray240 showing "no gps"
03-05-17, 04:46 PM (This post was last modified: 03-06-17 03:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
sb in gp Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2016
Reputation: 0
ray240 showing "no gps"
In my 2006 Sea Ray 44DB I have a factory installed Raymarine E120 (classic) chartplotter with all the bells and whistles (radar, autopilot, DSM300, etc). Everything works well but I have a couple of minor annoyances that I'm looking for advice on:

1. Ray240 VHF radio works well but is not talking to the chartplotter, says "no gps" on VHF display, so the DSC feature is not as useful.

This boat had the helm disassembled during transport, so something may have gotten wired wrong.

I'm a techie, but I know very little about the communications between these types of devices. I cannot find a wiring diagram from Sea Ray, so I'm looking for ideas.

How is the Ray240 and e120 normally interfaced?

Thank you.

Scottl
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ray240 showing "no gps" - sb in gp - 03-05-17 04:46 PM
RE: ray240 showing "no gps" - sb in gp - 03-12-17, 10:03 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication