Networking Axiom display to eSeries

[Chuck - Raymarine - Moderator]

Lynn,

Q. If I network the axiom and m200 into the setup, will the two different operating systems (Lighthouse 2 vs 3) create issues on the network with the data provided by my setup? I understand the realvision will not be able to be displayed on the eSeries until lighthouse 3 becomes available for it, but I'm wondering what other issues I may run in to until the software is updated.
A. MFDs running LightHouse II software and LightHouse 3 software may not be interfaced to one another. Should one attempt to interface MFDs running both of these operating systems to the same Ethernet Network, then the MFDs will alert the operators to the incompatibility and then shut the system down. Please click here to view a FAQ addressing this subject. Following the release of and subsequent installation of LH3 for a/c/e/eS/gS-Series MFDs, the AXIOM MFDs may be interfaced to a/c/e/eS/gS-Series MFDs.