Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV-1 with es98 only (no p70 or ACU) - Linearization?
04-18-17, 03:07 PM
Post: #2
RE: EV-1 with es98 only (no p70 or ACU) - Linearization?
Welcome to the Raymarine Forum JBuss,

Please click here to view a FAQ addressing recommended operating conditions to linearize and EV-1 Sensor Core. While the EV-1 will automatically linearize (i.e. create a deviation table), without an p70/p70S/p70R/p70RS Autopilot Control Head, heading alignment must be performed by rotating the EV-1 sensor core within its housing.

Q1. Is there any way I can see if the EV-1 is "learning", that means in linearization mode?
A1. No. This information may only be displayed via an p70/p70S/p70R/p70RS Autopilot Control Head.

Q2. Is there any way I can force the EV-1 to do a linearization using only an es98 MFD?
A2. No. As indicated within the response to Q1, linearization will automatically commence after the EV-1 senses that the vessel is underway.

Q3. How can I see which deviation the EV-1 has determined using the es98 MFD?
A3. This information may only be displayed via an p70/p70S/p70R/p70RS Autopilot Control Head.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: EV-1 with es98 only (no p70 or ACU) - Linearization? - Chuck - Raymarine - Moderator - 04-18-17 03:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)