CAM220IP Night View Issue

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

CAM220IP Night View Issue

05-31-17, 11:33 AM

Post: #1

JNelson90 Offline

Junior Member

Posts: 22
Joined: Feb 2016
Reputation: 0

CAM220IP Night View Issue

I have both a CAM200IP and CAM220IP camera installed on my boat and connected via an HS5 switch to 3 MFD's (a128, a78 & a78) The daytime image is perfect on both cameras but the nightime image on the CAM220IP is all washed out and I can barely identify what I am looking at. The CAM200IP night image is almost perfect. Not sure if I have a defective camera or if there are any settings to address this? I have tried all settings via the MFD but nothing made any real changes. Any input would be greatly appreciated.

« Next Oldest | Next Newest »

Messages In This Thread

CAM220IP Night View Issue - JNelson90 - 05-31-17 11:33 AM

RE: CAM220IP Night View Issue - Chuck - Raymarine - Moderator - 05-31-17, 12:34 PM

RE: CAM220IP Night View Issue - jim_m5 - 10-01-17, 07:03 AM

RE: CAM220IP Night View Issue - Chuck - Raymarine - Moderator - 10-02-17, 08:07 AM

RE: CAM220IP Night View Issue - JNelson90 - 10-16-17, 07:45 AM

RE: CAM220IP Night View Issue - Chuck - Raymarine - Moderator - 10-16-17, 08:45 AM

User(s) browsing this thread: 1 Guest(s)