The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSM 300 Issues
06-06-17, 01:11 PM
Post: #1
DSM 300 Issues
The Airmar Transducer - B60-200-RAY 50/200 (depth + temperature)
connects to the DSM300, and the DSM connects to the E120. This arrangement has worked fine for a number of years, but last summer it started to sound loud "beeps" preiodically and lose the signal to the E120. In addition, the indicator light on the DSM would go from green to orange. Then, after couple minutes, things would get back to normal. The situation continues this year.
Suspecting the xducer cable plug and /or DSM socket, quite often I can correct the situation by moving the cable slightly, so I installed a plastic tie on the cable just before the connector. It seems to help, but not always.My guess would be a defective xducer connector or socket on the DSM.
Any suggestions as to how I can identify and correct the culprit?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DSM 300 Issues - seeray96 - 06-06-17 01:11 PM
RE: DSM 300 Issues - seeray96 - 06-13-17, 02:51 PM
RE: DSM 300 Issues - seeray96 - 06-14-17, 10:02 AM
RE: DSM 300 Issues - seeray96 - 06-15-17, 08:46 PM
RE: DSM 300 Issues - seeray96 - 06-19-17, 08:40 PM
RE: DSM 300 Issues - seeray96 - 06-20-17, 09:47 AM
RE: DSM 300 Issues - seeray96 - 06-20-17, 12:08 PM
RE: DSM 300 Issues - seeray96 - 06-27-17, 01:54 PM
RE: DSM 300 Issues - seeray96 - 06-28-17, 12:03 PM
RE: DSM 300 Issues - seeray96 - 06-29-17, 12:50 PM
RE: DSM 300 Issues - seeray96 - 06-29-17, 03:12 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)