Raymarine forum / Raymarine Forums / General Discussions v / RS 125 Status Light Code

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RS 125 Status Light Code
06-15-17, 10:11 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: RS 125 Status Light Code
Welcome to the Raymarine Forum Team Ruby,

As the reported problem is not a defined state for the Raystar 125 GPS Sensor, the condition described would be indicative of a failure of the GPS sensor. You may want to try replacing the Raystar 125 GPS Sensor's CR2032 battery to restore proper operation. Should doing so not address the problem, then the Raystar 125 GPS Sensor would need to be replaced. Raymarine's Raystar 150 GPS Sensor is designed to support SeaTalkng/NMEA 2000 communications, but may also be adapted to supply GPS data to systems supporting SeaTalk or NMEA 0183 communications.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RS 125 Status Light Code - Team Ruby - 06-14-17, 08:40 PM
RE: RS 125 Status Light Code - Chuck - Raymarine - Moderator - 06-15-17 10:11 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication