Raymarine forum / Raymarine Forums / Multifunction Displays v / Waypoint GPX file format for data MFD A78

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Waypoint GPX file format for data MFD A78
06-23-17, 03:01 PM (This post was last modified: 06-23-17 03:02 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Waypoint GPX file format for data MFD A78
Welcome to the Raymarine Forum moorsb,

As you have indicated, waypoint, route point, and track points included within a GPS Exchange Format (GPX) file are specified as real numbers in units of degrees. This programming detail is hidden from users who export data from their products (chartplotters, MFDs, computer based navigational planning software, computer based Waypoint/Route/Track File programs, etc.) in GPX file format. However should waypoint coordinates be manually entered into a Raymarine MFD via its user interface, then the user will need to enter the whole number of degrees and the real number of minutes for the coordinate being entered.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Waypoint GPX file format for data MFD A78 - Chuck - Raymarine - Moderator - 06-23-17 03:01 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication