[CA] SPX computer conecting to Garmin 4212
|
07-06-17, 04:23 PM
(This post was last modified: 01-22-18 12:07 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA] SPX computer conecting to Garmin 4212
My customer has purchased a used power boat that has the spx autopilot as well as the Garmin 4212. They are currently not connected together. I have determined that the Garmin 4212 will put out the following PGNs 129283 Cross track error, 129284 navigation data, and the 129285 route/waypoint info. The question that I have will the spx support these PGN's when I connect the 4212 onto the Seatalkng /NMEA2000 buss?
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA] SPX computer conecting to Garmin 4212 - george123 - 07-06-17 04:23 PM
RE: SPX computer conecting to Garmin 4212 - Chuck - Raymarine - Moderator - 07-07-17, 12:37 PM
RE: [CA] SPX computer conecting to Garmin 4212 - tgsail1 - 01-20-18, 12:13 PM
RE: [CA] SPX computer conecting to Garmin 4212 - Chuck - Raymarine - Moderator - 01-22-18, 11:58 AM
RE: [CA] SPX computer conecting to Garmin 4212 - tgsail1 - 01-22-18, 10:17 PM
RE: [CA] SPX computer conecting to Garmin 4212 - Chuck - Raymarine - Moderator - 01-23-18, 10:05 AM
RE: [CA] SPX computer conecting to Garmin 4212 - tgsail1 - 01-28-18, 11:44 AM
RE: [CA] SPX computer conecting to Garmin 4212 - Chuck - Raymarine - Moderator - 01-29-18, 03:38 PM
RE: [CA] SPX computer conecting to Garmin 4212 - Nokay - 02-14-18, 11:35 PM
RE: [CA] SPX computer conecting to Garmin 4212 - Chuck - Raymarine - Moderator - 02-15-18, 09:55 AM
|
User(s) browsing this thread: 1 Guest(s)