The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fishfinder range locking onto large concentrations of fish
07-19-17, 10:39 AM (This post was last modified: 08-31-17 02:43 PM by Chuck - Raymarine - Moderator.)
Post: #1
Fishfinder range locking onto large concentrations of fish
Fishfinder range locking onto large concentrations of fish

The fishfinder screen images below show the bottom being tracked with the system automatically picking a depth range with a large school of fish while the boat anchored.

[Image: attachment.php?aid=1161]

[Image: attachment.php?aid=1160]

Should very strong returns from large concentrations of marine organics or downrigger [censored] be encountered, then the fishfinders which have been configured for Auto ranging may indeed interpret the returns as bottom and adjust the range accordingly. Under such conditions, configuring the fishfinder's range from AUTO to MANUAL and then adjusting the range to a depth which is slightly greater than the actual depth of the water (check the spot soundings or depth contours displayed on the chartplotter or paper chart) will typically address the problem. Under extreme conditions, it may be necessary to make adjustments to the Gain setting to be able to separate organics from the bottom.


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Fishfinder range locking onto large concentrations of fish - Chuck - Raymarine - Moderator - 07-19-17 10:39 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)