The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Seatalk HS Switch Diagnostics

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk HS Switch Diagnostics
08-22-17, 03:39 PM
Post: #1
KnotEnoughBills Offline
Junior Member
**
 		Posts: 6
Joined: Aug 2017
Reputation: 0
Seatalk HS Switch Diagnostics
I'm currently experiencing a problem with my E120 network. I have 2 E120s and a DSM300 all connected to a Seatalk HS Switch. Today while at the boat my secondary screen came up with a no master warning. I noticed that my master screen wasn't seeing either the DSM300 nor the slave E120. I checked my HS switch and none of the network lights were on at any of the Ethernet ports. I tried changing ports and still nothing. I verified power and ground to the switch which I had.

Other than this is there any other diagnostics I can perform on the HS switch or is it safe to assume the switch is bad? Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Seatalk HS Switch Diagnostics - KnotEnoughBills - 08-22-17 03:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication