Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk HS Switch Diagnostics
08-22-17, 04:01 PM
Post: #2
RE: Seatalk HS Switch Diagnostics
Welcome to the Raymarine Forum KnotEnoughBills,

Please click here to view a related FAQ which include information on troubleshooting SeaTalkhs communications. In this case, it would be recommended the SeaTalkhs Devices be listed on the non-Data Master MFD. Should neither MFD see one another or the DSM and should is be verified that the switch is powered, then it would be recommended that the SeaTalkhs Network Switch be replaced with a HS5 RayNet Network Switch. The currently installed SeaTalkhs cables may be adapted (part #A80247) to be mated to the Ethernet ports of the HS5 RayNet Network Switch.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Seatalk HS Switch Diagnostics - Chuck - Raymarine - Moderator - 08-22-17 04:01 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)