Upgrading plotter to C97 from RL70C, for use with ST60 instruments
|
10-17-17, 10:59 AM
Post: #2
|
|||
|
|||
RE: Upgrading plotter to C97 from RL70C, for use with ST60 instruments
Welcome to the Raymarine Forum ndp,
ST60 Speed/Tridata instruments may not be directly interfaced to a instrument transducers lacking a paddlewheel. However, should the transducer feature a NMEA 2000 communications interface and no speed/temp transducer be interfaced to the ST60 Speed/Triducer instrument, then the NMEA 2000 speed transducer may be interfaced as a spur to the SeaTalkng backbone to which the MFD has also been interfaced as a spur. Should the ST60 Speed/Tridata's configuration settings then be configured to support having the instrument function as a Speed repeater, then speed information from the NMEA 2000 speed transducer. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Upgrading plotter to C97 from RL70C, for use with ST60 instruments - captndp - 10-17-17, 08:55 AM
RE: Upgrading plotter to C97 from RL70C, for use with ST60 instruments - Chuck - Raymarine - Moderator - 10-17-17 10:59 AM
|
User(s) browsing this thread: 1 Guest(s)