Ray70 VHF Connection to Axiom 9 via HS5

[BForsyth]

Currently replacing all the outdated electronics our "new to us" 1998 Carver 400.

I have purchased the following:

1. Axiom 9 MFD with Lighthouse Charts and Real Vision 600w Sonar - E70367-00-LNC
2. Axiom 9 MFD with Lighthouse Charts - E70366-00-LNC
3. Quantum Q24C Radar with Data and Power Cables - T70243
4. CPT-110 Plastic Thru Hull Transducer - A80277
5. SD-USB card reader - A80440
6. Navionics Lake Erie Plat Plus Card - 649p+
7. HS-5 Network Switch - A80007
8. Adapter Cable for CPT-s to Axiom - A80490
9. (2) Raynet Female to Raynet Female Cable - A62361
10. Ray70 VHF Radio - E70251

I'm planning on having both Axiom 9 MFD connect to the HS-5 via the two purchased raynet cables. I will also have the Radar connect to the HS-5 so that both screens can pull up the radar. The CPT-110 Transducer will connect to the Axiom 9 MFD with Real Vision using the Adapter Cable. I will connect the SD reader to one of the screens so they can be easily updated.

I would like to connect the Ray70 VHF to my established network so that the AIS will show up on the screens. From what I understand it should connect using the included sea talk cable however I'm not sure how to connect the sea talk cable to the HS-5.

My question: Im unsure what adapter cable I need to go from the Ray70 VHF sea talk cable to connect to the HS-5 which uses Raynet Cables.

Also let me know if the system layout I have established makes sense or if you think Im missing something.


Looking forward to installing all of this!

Thanks!!