The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / General Discussions v / [CA] Propagate MFD alarm

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Propagate MFD alarm
12-07-17, 06:34 PM (This post was last modified: 12-08-17 09:28 AM by Chuck - Raymarine - Moderator.)
Post: #1
sergiobernardi Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2017
Reputation: 0
[CA] Propagate MFD alarm
I have an ES97 MFD. I need to propagate the MFD alarms to a buzzer inside the boat in order to hear e.g. the anchor drift alarm from the cabin. Based on the ES97 wiring diagram it does not seem there is an audio out connection, and the HDMI connection is video only. I thought I could capture the alarm tag on the bus with a programmable device that would provide an on/off output. Is there something like this available, or anyone knows a better solution? (I would not want to buy another MFD)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Propagate MFD alarm - sergiobernardi - 12-07-17 06:34 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication