The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [TG] Replaced DSM300 with CP370 to restore numeric depth reading

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Replaced DSM300 with CP370 to restore numeric depth reading
01-07-18, 09:45 AM (This post was last modified: 01-08-18 09:11 PM by Tom - Raymarine - Moderator.)
Post: #1
riptyler Offline
Junior Member
**
 		Posts: 9
Joined: Jun 2016
Reputation: 0
[TG] Replaced DSM300 with CP370 to restore numeric depth reading
After installing the CP370 - I was finally able to have numeric depth (fishfinder always worked on the DSM300). So I updated the software to 13.34 and can't beleive I'm back to no numeric display and the fishfinder appears to have a lot of blips (no longer displays the flat bottom. I have rebooted and have Reset the CP370 with no change. I've no real need for the fishfinder I would just like a reliable depth finder. System has P79 transducer and E80 MFDs and a SeaTalk HS switch.

I've been fighting this issue since purchasing this boat in 2013 and would like to get it fixed so that one day I can sell the boat with a working depth finder integrated to the Raymarine Nav equipment.

Any suggestions???
Thanks,
Rip
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG] Replaced DSM300 with CP370 to restore numeric depth reading - riptyler - 01-07-18 09:45 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication