The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / Dragonfly 4 Pro w/ update 12.09 not working properly

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dragonfly 4 Pro w/ update 12.09 not working properly
03-28-16, 01:06 PM (This post was last modified: 03-28-16 03:45 PM by Chuck - Raymarine - Moderator.)
Post: #1
Texas_Rig_N_Jig Offline
Junior Member
**
 		Posts: 4
Joined: Feb 2016
Reputation: 0
Dragonfly 4 Pro w/ update 12.09 not working properly
I have had my Dragonfly 4 Pro since November of last year. No issues at all with it. I did the update to v. 12.09 and then my problems started.

Depth only works around 10mph and below, if I go above that, the screen goes blue and shows 1200'. Sonar does the same thing, works till about 10mph and then goes white.

GPS seems to take alot longer to get my position now.

I did a reset on the unit when the issues first started to see if it would fix it, and it has not.

Thanks,

Stephen Phillips
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Dragonfly 4 Pro w/ update 12.09 not working properly - Texas_Rig_N_Jig - 03-28-16 01:06 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication