COG - hsb2 Pathfinder Series Radar Display

[Dave - Raymarine - Moderator]

Hello Ken Tait,

To shut off the COG vector on your charts, follow these instructions: While in the chartplotter portion of your display, press the menu button > chart setup > COG vector > choose the "off" selection with the corresponding gray soft key.

As for your temperature not displaying, there is a good chance the thermistor inside your transducer has failed. The thermistor changes resistance according to temperature and allows your MFD to display that information. If temperature if a vital piece of information for you, I suggest replacing your transducer.

- Dave