Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Replacing ST5000+ control head with p70s
02-04-18, 02:40 PM (This post was last modified: 02-13-18 12:03 PM by Derek - Raymarine - Moderator.)
Post: #1
(DG) Replacing ST5000+ control head with p70s
I have been in discussion with your Tech support and this forum about a full upgrade (radar, MFD, i60, i70s, EV-1 autohelm, AIS, etc from RL70C and ST60 vintage) but have a more immediate issue to address vs cost of total upgrade. My ST5000+ LCD is fading, thus the need to replace it, the autopilot control is good - see attached pics for this and back of the control head for wiring and questions.

I have read the two FAQs on using the p70s control head in place of the ST5000+ control head but still am having trouble visualizing the actual wiring using the D244 junction box, the A22164 adapter cable and p70s control head.

I have looked on your website but can not find a diagram for the connections on the back of he D244 and the p70s. I do not understand where all the connections on the back of the ST5000+ control head (fluxgate compass, drive, clutch, rudder, ?)are going between the D244, the p70s and then to the RL70C via Seatalk1.

Will you please provide schematic diagram. I currently have 3 other ST60s (boat speed, wind, depth) daisy chained to the ST5000+.

Thanks for your help.
Bill
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG) Replacing ST5000+ control head with p70s - billworsley - 02-04-18 02:40 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us