The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Legacy C80 and E80

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Legacy C80 and E80
02-07-18, 02:28 PM (This post was last modified: 02-08-18 12:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
Marinetech_01 Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2018
Reputation: 0
[CA] Legacy C80 and E80
Hello, I was given 2 Legacy C80 not the wide with radar and with a 250 sonar module. and a E80. I want to be able to have Radar, GPS and Sonar at all three units. Is this possible? I have the cabling to hook up one C80 to the sonar and radar. What are the part numbers of the adapters to network the 2 C80s together. I have lots of ng cabling so I dont need backbones or drop cables just the adapters. Also can I network in the E80. I think I need two of the A06048 for the C series and one of the A06061 for the E series is this correct do I need more.

Thank You
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Legacy C80 and E80 - Marinetech_01 - 02-07-18 02:28 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication