Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Adding STNG and N2K to exisiting Seatalk
02-20-18, 03:21 PM (This post was last modified: 02-20-18 03:49 PM by Chuck - Raymarine - Moderator.)
Post: #11
RE: [CA] Adding STNG and N2K to exisiting Seatalk
Chuck, again many thanks. I appreciate you validating the proposed design (I understand this does not imply guaranteed performance!)

Re: Q4 - I thought the SeaTalk-SeatalkNG manual was pretty unambiguous on this, that's why I included a second R52131 in the design. Please see attached Pages 16/21 of the manual. Am I missing something here? Regardless, I need at least two more STng ports in the system to support the planned devices, so it's either a R52131 or an A06064 - which would be a lot cheaper, agreed.

If I do decide to combine the RS125 with the two C-120's SeaTalk outputs at the SeaTalk Auxiliary Junction Box, please confirm the attached J-box wiring PDF would be the correct wiring for this.
My apologies for the hand-drawn portions.

Thanks again -


Attached File(s)
.pdf  J-Box_Wiring.pdf (Size: 351.7 KB / Downloads: 314)
.pdf  Page21.pdf (Size: 76.07 KB / Downloads: 275)
.pdf  Page16.pdf (Size: 100.68 KB / Downloads: 351)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Adding STNG and N2K to exisiting Seatalk - Grantj - 02-20-18 03:21 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)