The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Autopilot pump for Evinrude twin 300HP Etec G2's
03-07-18, 05:18 PM (This post was last modified: 03-08-18 09:54 AM by Derek - Raymarine - Moderator.)
Post: #1
(DG) Autopilot pump for Evinrude twin 300HP Etec G2's
I have a customer that is looking to install an autopilot EVO system on a twin Evinrude 300 G2 system. The G2 has a built in hydraulic system with power assist. There are no external RAM's required with these motors. You just connect the hydraulic lines from the helm pump to the motors. I need some assistance in sizing the pump for twins. There is very little information on the specs or configuring there outboards for autopilot pumps. I am hoping that Raymarine or someone one the forum will be able to shed some light.

George
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG) Autopilot pump for Evinrude twin 300HP Etec G2's - george123 - 03-07-18 05:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)