The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] Ev-150 install

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Ev-150 install
04-03-18, 08:00 PM (This post was last modified: 04-04-18 02:30 PM by Chuck - Raymarine - Moderator.)
Post: #1
Makoman23 Offline
Junior Member
**
 		Posts: 4
Joined: Apr 2018
Reputation: 0
[CA] Ev-150 install
I picked up an ev150 autopilot and plan to install it in my 23 ft center console.I have read all the directions included and still have a few questions regaurding possible interference issues being that I don't have much room to work with or many options when it comes to mounting the system components.
Q1-How sensitive is the pump mounting location when it comes to mounting it near a vhf or trim tab pump? The location I would like to mount the pump puts it about a foot away from a trim tab pump and about 8 inches away from a vhf.
Q2- I would like to mount the ACU150 control unit directly behind where the p70r control will be flush mounted, therefore the ACU150 would be about 6inches or so from the back of the p70r. Is this acceptable?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Ev-150 install - Makoman23 - 04-03-18 08:00 PM
RE: [CA] Ev-150 install - Makoman23 - 04-07-18, 07:29 PM
RE: [CA] Ev-150 install - Makoman23 - 04-12-18, 08:21 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication