Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Connecting to ev1, mfd, transponder
04-17-18, 08:58 AM
Post: #6
RE: [CA] Connecting to ev1, mfd, transponder
Ahelbig,

Q. Am I correct in saying I can use a male devicenet adapter cable and then use a nmea spur cable to connect to the remaining port on the nmea backbone.
Could you confirm the part number for me please.
A. Should you elect to go with a NMEA 2000 backbone which has been constructed from third party NMEA 2000 networking components, you will need to ensure that the backbone which has been constructed has sufficient spur socket's (T's) to permit each device having a SeaTalkng communications socket to be interfaced to the third party backbone. Depending upon whether the T's feature a DeviceNet (F) (most common) or DeviceNet (M) socket a SeaTalkng to DeviceNet Adapter Cable having the correct gender of DeviceNet plug will need to be purchased. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Connecting to ev1, mfd, transponder - Chuck - Raymarine - Moderator - 04-17-18 08:58 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)