The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AUTO TURN angle
04-16-18, 09:34 AM
Post: #1
AUTO TURN angle
When in auto mode the 10 and 1 keys are selected together to tack, the pilot will default to a turn angle of 90 degrees. In some installations or for some types of vessel, you may want to change this to a smaller or a larger angle to make sure the vessel makes the tack successfully,of course the heading can be trimmed afterwards.

Note: this is applicable only when not in wind mode.

This angle setting can be adjusted in calibration by ensuring CAL LOCK is set to OFF and then the AUTO TURN angle is adjustable in the DRIVE settings menu.

RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
AUTO TURN angle - Derek - Raymarine - Moderator - 04-16-18 09:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)