Autopilot calculations
|
04-04-16, 09:15 PM
(This post was last modified: 04-05-16 02:17 PM by Steve - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
Autopilot calculations
I have the following Raymarine instruments
One S1 SmartPilot, E15016 w/ fluxgate compass Two SmartPilot Controllers, one ST8001 and one ST8002 One E120 Chartplotter One RS130 GPS Both controllers are connected to the SmartPilot via SeaTalk. The fluxgate compass is connected to the SmartPilot via its dedicated terminals. The Chartplotter’s NMEA 0183 output is connected to the Autopilot’s NMEA 0183 input. The GPS is connected to the Chartplotter via SeaTalkng. The system works well. Which of the units calculates the new heading when the chartplotter advances to a new waypoint? Which unit calculates the crosstrack error? Which unit adjusts the heading to reduce the crosstrack error? Thank you |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Autopilot calculations - Lew Springer - 04-04-16 09:15 PM
RE: Autopilot calculations - Steve - Raymarine - Moderator - 04-05-16, 02:59 PM
RE: Autopilot calculations - Lew Springer - 04-05-16, 03:42 PM
RE: Autopilot calculations - Lew Springer - 04-05-16, 08:34 PM
RE: Autopilot calculations - Steve - Raymarine - Moderator - 04-07-16, 08:42 AM
|
User(s) browsing this thread: 1 Guest(s)