The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA11] DSM30/Airmar/E120 Fault Isolation

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] DSM30/Airmar/E120 Fault Isolation
04-23-18, 07:04 AM (This post was last modified: 05-30-18 10:39 AM by Chuck - Raymarine - Moderator.)
Post: #1
mistertj Offline
Junior Member
**
 		Posts: 15
Joined: Feb 2016
Reputation: 0
[CA11] DSM30/Airmar/E120 Fault Isolation
For several years my DSM30 with Airmar transducer hooked to my classic E120 has given good service. Now, the only time it works is at the dock and that is intermittent. Is there a way that I could tell which item in the system has gone faulty?
If I were to consider replacing, what would be a recommendation? I have both a Classic E120 and C140wide MFDs.
p.s. I have considered purchasing a used DSM30 and trying it to see if that might fix the problem but most sellers will not accept a return.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] DSM30/Airmar/E120 Fault Isolation - mistertj - 04-23-18 07:04 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication