Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom RMK-10
04-26-18, 03:14 PM (This post was last modified: 04-27-18 08:47 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] Axiom RMK-10
Welcome to the Raymarine Forum Larry,

When used with any product other than a gS-Series MFD, the RMK-9 and RMK-10 Remote Keypads must be powered from a switched 12VDC power circuit. While it sounds as though you may have had a problem with the first RMK-10, the second is clearly missing installation of power. Once properly installed, then RMK-10 must be paired to the MFD. Detailed instructions for doing so may be found within Chapter 4.9 Device pairing of the LightHouse 3.4 Advanced Operation Instructions.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Axiom RMK-10 - Larrysr - 04-24-18, 11:04 PM
RE: [CA] Axiom RMK-10 - Chuck - Raymarine - Moderator - 04-26-18 03:14 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us