Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Remote control unit not found
01-03-17, 10:26 AM
Post: #4
RE: Remote control unit not found
Helmling,

As the gS-Series MFDs featured POE Ethernet network ports, the Ethernet Network ports of these MFDs may be used to power POE powered devices such as the RMK-9. However, in systems where intermittent communications between a RMK-9(s) and gS-Series MFDs has been reported, this communications issue would typically be addressed by powering the RMK-9 via the RMK-9's power socket. It is recommended that the RMK-9(s) be powered by the same circuit which is protecting the circuit supplying power to the MFDs and Ethernet Switch(es). The power circuit to the RMK-9 should be protected with a 2A slow blow fuse.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Remote control unit not found - Chuck - Raymarine - Moderator - 01-03-17 10:26 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)