The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] i50 depth and nmea 2k transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] i50 depth and nmea 2k transducer
05-11-18, 01:19 PM (This post was last modified: 05-14-18 12:50 PM by Chuck - Raymarine - Moderator.)
Post: #1
laurentdubois Offline
Junior Member
**
 		Posts: 8
Joined: May 2018
Reputation: 0
[CA] i50 depth and nmea 2k transducer
I'm looking for confirmation on whether or not the i50 depth instrument can display data coming from a nmea 2k transducer (i50 and DST 800 smart transducer connected on nmea 2k backbone).
If not possible, which similar display would work with that setup (there might be an MFD in the future but looking at smaller/cheaper display for now...).

Thanks in advance
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] i50 depth and nmea 2k transducer - laurentdubois - 05-11-18 01:19 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication