[TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder

06-27-18, 02:13 AM

Post: #10

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder

Sorry for the delay replying, I've been out of the office a bit recently.

You can use any hydraulic pump, as long as its peak current consumption is within the range of the ACU's current output (and of course as long as the flow rate is correct, as it sounds like this one is.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Horacio Battistini - 05-26-18, 06:49 AM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Tom - Raymarine - Moderator - 05-29-18, 06:47 PM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Horacio Battistini - 05-30-18, 05:14 AM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Tom - Raymarine - Moderator - 05-30-18, 09:01 PM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Horacio Battistini - 05-31-18, 06:04 PM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Tom - Raymarine - Moderator - 05-31-18, 11:20 PM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Horacio Battistini - 06-08-18, 08:11 AM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Tom - Raymarine - Moderator - 06-12-18, 07:03 PM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Horacio Battistini - 06-21-18, 10:00 AM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Tom - Raymarine - Moderator - 06-27-18 02:13 AM

User(s) browsing this thread: 1 Guest(s)