[CA11] CPT-200 Blurred Water Area

[chartertom]

This post is being written to ask if there is any adjustment for the CPT-200 transducer / module that may clear up the blurred water areas outlined in red. Transducer elements are adjusted as far toward the water (away from sea floor) as possible. Turbulence should not be an issue as the vessel was traveling at 0.3 knots. The mounting configuration is shown in the image attached to my 30 Apr 2018 thread to post titled “CPT-200 Transducer Installation.”

The objective to having the transducer elements adjusted as far toward the water (away from sea floor) as possible and the need for clear water areas is to clearly see bait pods while trolling for tuna.