The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [DG] Raymarine 400G and Lighthouse 3

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] Raymarine 400G and Lighthouse 3
05-30-18, 04:39 PM (This post was last modified: 05-31-18 09:36 AM by Derek - Raymarine - Moderator.)
Post: #1
svalvasori Offline
Junior Member
**
 		Posts: 9
Joined: Mar 2018
Reputation: 0
Raymarine 400G and Lighthouse 3
Is the 400 or 400G autopilot computer with the ST600R control unit designed to work with Lighthouse 3? I have the converter installed and passing data but am not able to enable auto pilot slider in the MFD display settings. The MFD's are es127 and Axiom 7.

Also, I see heading coming from the autopilot and displaying on the MFD's, but there is a 10 degree offset (autopilot control shows 120 deg and the MFD shows 110 deg). What would be the cause of this?

Thank you,

Steve.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Raymarine 400G and Lighthouse 3 - svalvasori - 05-30-18 04:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication