The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] replace C80-help
05-30-18, 04:56 PM (This post was last modified: 05-31-18 10:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] replace C80-help
I have a 2006 c80 Classic with a DSM 300 module, Rs232 (I have no idea what this does) and GPS. The gps also sends position data to my raymarine VHF. The boat is a small 22' center console so don't need any more functionality.

The c80 appears to be dying as the screen starts up grey and fades to black. If I bang it, the screen display pops back but splits in the middle. Sometimes it works just fine, too.

I am looking at replacement, and after reviewing the these forums, think I may be able to do the following and wanted to confirm.

Remove DSM 300 module and C80 display with all wiring. Remove RS232 and gps antenna.

Replace c80 with Axiom 9 DV (or do they only make RV in the 9?).

Get an adapter for the transducer A80485(?) and a face plate adapter (A80564).

Am I in the right ball park? I assume the transducer can direct connect to the axiom with the adapter, which would be a huge win for me as I would not have to run a wire and re-use the transducer saving money and a [censored] in the boat.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] replace C80-help - jbodell - 05-30-18 04:56 PM
RE: [CA11] replace C80-help - jbodell - 05-31-18, 03:27 PM
RE: [CA11] replace C80-help - jbodell - 06-04-18, 12:15 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)