[TG] [TG11] Autopilot EV-150

[Hooksdj]

I have a 2014 Striper with a 225hp and 15HO Hp Etec on it. Recently had a Axiom 9 combined with a EV-150 autopilot installed. Just had it out on Banks Lake, Wa. I have two basic questions. The first day I was able to get patterns working using my P70Rs however the second day I could not get any of the patterns to function. I did some recalibration or reinstallation the second day think it might have have done worse than good. Aside from my doing I think the high banks contributed to loosing some gps signal which probably did not help.

Basic questions;

1) Granted I lost some gps I still had some signal, will a little loss of signal cause the autopilot patterns mode to turn off entirely?

2) Is there any way to create multiple waypoints to follow? I setup 4 or 5 waypoints and set to follow but the autopilot would start to one waypoint and then ask to move onto the second, third or even the last one while bypassing the others. I am trying to set waypoints and follow contours to follow the coastline

PS. I could set one waypoint destination and at WOT ,pretty much, it will get me there.

Dean